Groundwater

Person in a yellow safety vest crouching near a wetland, holding a notebook and placing a measuring cup into the water.

Each water test comes with a digital report back. The digital report is emailed once results are received and includes a full lab analysis which contains Method Detection Limit (lowest concentration at which an analyte can be detected), Reporting Limit (lowest concentration at which a numerical value can be confidently assigned), parameters analyzed, and method of testing. We then offer recommendations and referrals for your mitigation and filtering solutions, when available.

*Lab turnaround times vary depending on analytes tested*

Please note: The total price of each test listed below includes collection, laboratory fees, digital report, a 30 minute consultation to review results, and referrals for mitigation and filtration companies in your area as well as product recommendations.

Purchase 2 tests and receive 5% off

Purchase 3 tests and receive 10% off

Contact Us to Schedule Your Sample Collection
Four different types of metal or mineral blocks with varying colors and textures, placed on a reflective surface.

Metals & Minerals

$479

Additional Samples: $205 each

Test for a broad array of metals and minerals in one (1) non-potable water sample. 35 analytes included.

  • Metals & Minerals Non-Potable Water Test

    Calculation: Grains per gallon, Hardness (Ca,Mg), Hardness (Total), Sodium Adsorption Ratio

    Metals: Aluminum, Iron, Lithium, Strontium, Titanium, Zinc, Antimony, Arsenic, Barium, Beryllium, Cadmium, Chromium (Total), Cobalt, Copper, Lead, Manganese, Mercury, Molybdenum, Nickel, Selenium, Silver, Thallium, Tin, Uranium, Vanadium

    Inorganics: Boron, Phosphorus

    Minerals: Calcium, Magnesium, Potassium, Sodium

Close-up of metallic spheres of various sizes on a reflective surface in a scientific or laboratory setting.

RCRA 8 Metals

$569

Additional Samples: $295 each

Specialized testing for RCRA 8 metals–the eight heavy metals monitored by the Resource Conservation and Recovery Act–in one (1) non-potable water sample. 8 analytes included.

  • RCRA 8 Metals Non-Potable Water Test

    Metals: Arsenic, Barium, Cadmium, Chromium (Total), Lead, Selenium, Silver, Mercury

Rows of green lettuce plants growing in hydroponic system

Essential Hydroponics

$525

Additional Samples: $249 each

Basic water quality testing for one (1) non-potable water sample designed to help assess overall suitability for use in hydroponic agriculture and aquaculture. 45 analytes included.

  • Essential Hydroponics Non-Potable Water Test

    Calculation: Chloride-to-Sulfate Mass Ratio, Grains per gallon, Hardness (Ca,Mg), Hardness (Total), Langelier Saturation Index, Sodium Adsorption Ratio

    Properties: pH, Alkalinity (as CaCO3), Hardness, Total Dissolved Solids

    Metals: Aluminum, Iron, Lithium, Strontium, Titanium, Zinc, Antimony, Arsenic, Barium, Beryllium, Cadmium, Chromium (Total), Cobalt, Copper, Lead, Manganese, Mercury, Molybdenum, Nickel, Selenium, Silver, Thallium, Tin, Uranium, Vanadium

    Inorganics: Boron, Phosphorus, Chloride, Fluoride, Nitrate (as N), Sulfate

    Minerals: Calcium, Magnesium, Potassium, Sodium

A hand holding a stop sign in front of an environmental map showing a body of water and rocks.

CAM 17 Metals

$665

Additional Samples: $389 each

Specialized testing for CAM 17 metals–also known as Title 22 metals–in one (1) non-potable water sample. 17 analytes included.

  • CAM 17 Metals Non-Potable Water Test

    Metals: Antimony, Arsenic, Barium, Beryllium, Cadmium, Chromium (Total), Cobalt, Copper, Lead, Molybdenum, Nickel, Selenium, Silver, Thallium, Vanadium, Zinc, Mercury

Close-up of a furrow between rows of corn with irrigation water and soil, shot from ground level.

Irrigation Water

$525

Additional Samples: $250 each

Water quality testing for one (1) non-potable water sample designed to help assess overall suitability for use in irrigation. 19 analytes included.

  • Irrigation Non-Potable Water Test

    Calculation: Hardness (Total), Sodium Adsorption Ratio

    Properties: pH, Alkalinity (as CaCO3), Total Dissolved Solids, Specific Conductivity

    Metals: Copper, Iron, Manganese, Zinc

    Inorganics: Ammonium, Chloride, Nitrate (as N), Boron, Sulfate

    Minerals: Calcium, Magnesium, Potassium, Sodium

Illustration of bacteria on a surface, enlarged for microscopic view, with rod-shaped bacteria and smaller round bacteria.

Mycobacterium

$899

Additional Samples: $625 each

Specialized testing for non-tuberculosis mycobacterium (NTM) in one (1) non-potable water sample. 210 analytes included.

  • Mycobacterium Non-Potable Water Test

    Please contact us for a full list of analytes.

Water flowing into a drain surrounded by leaves.

Glyphosate Stormwater

$525

Additional Samples: $250 each

Targeted test for glyphosate–the herbicide also frequently known as RoundUp–in one (1) stormwater sample. 1 analyte included.

  • Glyphosate Stormwater Test

    Herbicides: Glyphosate

Close-up view of a blue sphere with bubbles around it, labeled 'PFAS', surrounded by other blurred bubbles and lights in the background.

EPA 1633 PFAs

$1195

Additional Samples: $920 each

Specialized analysis of 40x PFAS compounds by EPA 1633 for one (1) non-potable water sample. 40 analytes included.

  • EPA 1633 PFAs Non-Potable Water Test

    PFAs: 11-Chloroeicosafluoro-3-oxaundecane-1-sulfonic acid,
    4,4,5,5,6,6,6-Heptafluorohexanoic acid,
    4,8-dioxa-3H-perfluorononanoic acid,
    4:2 Fluorotelomer sulfonic acid,
    5:3 FTCA,
    6:2 Fluorotelomer sulfonic acid,
    7:3 FTCA,
    8:2 Fluorotelomer sulfonic acid,
    9-Chlorohexadecafluoro-3-oxanonane-1-sulfonic acid,
    GenX,
    N-Ethyl perfluorooctane sulfonamide,
    N-Ethyl perfluorooctane sulfonamidoethanol,
    N-Ethyl perfluorooctanesulfonamidoacetic acid,
    N-Methyl perfluorooctane sulfonamide,
    N-Methyl perfluorooctane sulfonamidoethanol,
    N-Methyl perfluorooctanesulfonamidoacetic acid,
    Perfluoro-3,6-dioxaheptanoic acid,
    Perfluoro-4-oxapentanoic acid,
    Perfluoro-5-oxahexanoic acid,
    Perfluoro(2-ethoxyethane)sulfonic acid
    Perfluorobutanesulfonic acid
    Perfluorobutonic acid,
    Perfluorodecanoic acid,
    Perfluorododecanoic acid,
    Perfluoroheptanesulfonic acid,
    Perfluoroheptanoic acid,
    Perfluorohexanesulfonic acid,
    Perfluorohexanoic acid,
    Perfluorononanesulfonic acid,
    Perfluorononanoic acid,
    Perflurooctanesulfonamide,
    Perfluorooctanesulfonic acid,
    Perfluorononanoic acid,
    Perfluorooctanesulfonic acid,
    Perfluorooctanoic acid,
    Perfluoropentanesulfonic acid,
    Perfluoropentanoic acid,
    Perfluorotetradecanoic acid,
    Perfluorotridecanoic acid,
    Perfluoroundecanoic acid

Close-up of glowing, bioluminescent microorganisms or bacteria with hair-like structures against a dark background.

Pennsylvania E. coli

$485

Additional Samples : $210 each

High-precision test for the presence or absence of coliform and E. coli bacteria in one (1) non-potable water sample at a PA-DEP accredited testing facility with field of accreditation for E. coli in non-potable water by SM 9223B. 2 analytes included.

  • Pennsylvania E. Coli Non-Potable Water Test

    Bacteria: E. coli, Total Coliform

Close-up of a mineral or crystal formation with fibrous and spiky textures.

Asbestos

$830

Additional Samples: $555 each

Targeted test for asbestos fibers (> 10 um) in one (1) non-potable water sample. 6 analytes included.

  • Asbestos Non-Potable Water Test

    Minerals: Actinolite, Amosite, Anthophyllite, Chrysotile, Crocidolite, Tremolite

Person using a pipette to transfer liquid into a small glass container

Total Suspended Solids

$459

Additional Samples: $185 each

Targeted test for total suspended solids (TSS) in one (1) non-potable water source. TSS are comprised of the extremely small organic and inorganic matter which do not "settle out" by gravity and are unable to pass through a very fine filter (typically 0.45 micron). 1 analyte included.

  • Total Suspended Solids Non-Potable Water Test

    Properties: Total Suspended Solids

A watercolor painting of a blue sea anemone or coral with elongated tentacle-like structures.

Fusarium

$729

Additional Samples: $455 each

Specialized test for fusarium genus identification and quantification in one (1) non-potable water sample. 1 analyte included.

  • Fusarium Non-Potable Water Test

    Fungi: Fusarium

Blue graphic with bubbles and the word "Tritium" in the center.

Tritium

$599

Additional Samples: $325 each

Specialized testing of one (1) non-potable water sample for tritium–a radioactive isotope of hydrogen, also known as hydrogen-3.

  • Tritium Non-Potable Water Test

    Radionuclides: Tritium

Numerous bacteria or bacteria-like microorganisms floating in a greenish liquid environment.

Fusarium Species Identification

$1019

Additional Samples: $745 each

Specialized test for fusarium species identification–with DNA confirmation–and quantification in one (1) non-potable water sample. 37 analtyes included.

  • Fusarium Species Identification

    Please contact us for a complete list of analytes.

A science model of the element Lithium from the periodic table, with chemical symbols and atomic number, placed on a dark surface with some rocks nearby.

Lithium

$459

Additional Samples: $185 each

Targeted test for lithium in one (1) non-potable water sample. 1 analyte included.

  • Lithium Non-Potable Water Test

    Metals:Lithium

Green leafy plant inside a greenhouse

Pythium & Phytophthora

$1125

Additional Samples: $849 each

Specialized test for the presence or absence of pythium and phytophthora in one (1) non-potable water sample. 2 analytes included.

  • Pythium & Phytophthora Non-Potable Water Test

    Fungi: Phytophthora, Pythium

Illustration of the chemical element calcium from the periodic table, symbol Ca, atomic number 20, atomic weight 40.078.

Calcium

$469

Additional Samples: $195 each

Targeted test for calcium in one (1) non-potable water source.

  • Calcium Non-Potable Water Test

    Minerals: Calcium

Cluster of ripe and unripe tomatoes on the vine in a garden.

Pythium & Phytophthora Species Identification

$1595

Additional Samples: $1319 each

Specialized test for pythium and phytophthora species identification–with DNA confirmation–and quantification in one (1) non-potable water sample. 377 analytes included.

  • Pythium & Phytophthora Species Identification

    Please contact us for a complete list of analytes.

A glass dish filled with a white powdery substance, with lab glassware containing liquids in the background.

Salts

$525

Additional Samples : $249 each

Targeted test for sodium, potassium, and chloride in one (1) non-potable water sample. 3 analytes included.

  • Salts Non-Potable Water Test

    Minerals: Potassium, Sodium

    Inorganics: Chloride

Chemical structure of methyl tert-butyl ether with molecular formula and name

MTBE

$649

Additional Samples: $375

Specialized testing of one (1) non-potable water sample for methyl tert-butyl ether (MTBE). 1 analyte included.

  • MTBE Non-Potable Water Test

    Petroleum Compounds: Methyl Tertiary Butyl Ether

Electric car on fire with flames and smoke, burning vehicle nearby, outdoors in a wooded area.

Battery Fire Contamination

$600

Additional Samples: $325 each

Specialized testing for common metals and anions related to battery fire contamination in one (1) non-potable water sample. 8 analytes included.

  • Battery Fire Contamination Non-Potable Water Test

    Inorganics: Fluoride, Phosphorus

    Metals: Aluminum, Cobalt, Lithium, Manganese, Nickel, Titanium

Close-up of a finger with paint and glitter on it.

Microplastics

$1010

Additional Samples: $735 each

Specialized screening test for microplastic particles in one (1) non-potable water sample. Particles between 1 micron (μm) and 10μm are reported as presence/absence and particles 10μm and larger are quantified.

Please note: The smallest sizes of microplastics are typically the most difficult to detect but they are the most abundant. Methods for microplastics analysis are rapidly improving and inter-lab comparisons can be difficult. 6 analytes included.

  • Microplastics Non-Potable Water Test

    Microplastics: Microplastics (<10 um), (50-100 um), (10-50 um), (100-500 um), (500-1000 um), (1000-5000 um)

Close-up of a person's hand holding a magnifying glass with sprinkles of colorful icing against a frosted cake background.

Advanced Microplastics

$1175

Additional Samples: $899 each

Specialized test for microplastic particle count and polymer identification in one (1) non-potable water sample. Particles between 1 micron (μm) and 10μm are reported as presence/absence and particles 10μm and larger are quantified and polymer types are identified.

Please note: The smallest sizes of microplastics are typically the most difficult to detect but they are the most abundant. Methods for microplastics analysis are rapidly improving and inter-lab comparisons can be difficult. 43 analytes included.

  • Advanced Microplastics Non-Potable Water Test

    Microplastics:

    High-density polyethylene (Plastic #2)- (>5000 um), (10-50 um), (100-500 um), (1000-5000 um), (50-100 um), (500-1000 um)

    Low-density polyethylene (Plastic #4)- (>5000 um), (10-50 um), (100-500 um), (1000-5000 um), (50-100 um), (500-1000 um)

    Microplastics (<10 um)

    Other Plastic (Plastic #7)- (>5000 um), (10-50 um), (100-500 um), (1000-5000 um), (50-100 um), (500-1000 um)

    Polyethylene terephthalate (Plastic #1)- (>5000 um), (10-50 um), (100-500 um), (1000-5000 um), (50-100 um), (500-1000 um)

    Polypropylene (Plastic #5)- (>5000 um), (10-50 um), (100-500 um), (1000-5000 um), (50-100 um), (500-1000 um)